Wednesday, 29 October 2014




New CT For English Rose Designs Brielle 1
This is an awesome and beautiful poser, she is a
knockout with her beauty, long dark hair and 
pretty eyes, you best get her today!
You can purchase her here:
http://erosedesigns.weebly.com/brielle.html
Preview on my Blog:http://creacionespatica.blogspot.com/

Friday, 24 October 2014

CT Tutorial featuring "Brielle"




**This tutorial was written using Photoshop CC. I believe the instructions should work with various other versions, but they are not tested on any other version.  This tutorial is my own creation.  Any similarity to any other tutorial is not done purposely or knowingly (aside from the fact that the process is pretty similar in most tutorials).  If you do not know how to do some of the things I mention here (like mirroring an image, adding a drop shadow, resizing elements, etc.), check out my “Tips and Tricks” tutorial. **

Supplies:
PTU Poser – “Brielle 1” by English Rose Designs.  You can purchase this elegant beauty at her store, English Rose Designs.

PTU Kit - “Hippie Love” by Abstract Creations.  Available for purchase at Abstract Creations store.

FTU Mask - "Mask 12 - Flash" by Aeval Amore.  Available for download on my blog, Aeval's Art.

Abbreviations:
DS – Drop Shadow

Settings I use:
DS Settings - Blend Mode set to Multiply, Opacity set to 75%, Angle set to 120 degrees, Distance 5, Spread 0, Size 5

Ready…..Set….Tag!
Open Paper 2 in a new canvas.  Double click on the layer to unlock it.

Add the Mask to the canvas and resize if needed so it is the same size as the paper.  Then drag the mask layer below the paper layer.

With the mask layer selected, select all (Ctrl + A) and copy the entire canvas (Ctrl + C).  You will see dashed lines surround the canvas. 

Click on the paper layer to activate it, then turn on quick mask (Press the Q key on your keyboard).  The dashed lines will disappear and that is ok.  Next Paste onto the paper (Ctrl + V) and turn your Quick Mask off (Q again). 

You will now see a dotted outline of the mask on your paper.  Press the button on the bottom of layers side bar that is a rectangle with a circle cut out of it.  The mask will now show. 

Right click on the paper layer and select Convert to Smart Image.  This releases just the mask.  The background layer of the mask will become invisible on its own.

Open a new canvas (Ctrl +N) 700 x 700, transparent background.  This will be referred to as the working canvas in my directions when switching between canvases.

Add the paper/mask combination from above to the working canvas.  Resize to fit the canvas.

Add Element 40 to the canvas and resize to fit the width of the canvas.  Position at the top of the canvas and add DS.

Add Element 31 to the canvas and resize to about ¾ the width of the canvas.  Position close to the right side of the tag. Add DS.

Add Paper 3 to the canvas.  Resize to fit over the opening in the frame in the element above.  Move the paper layer below the frame.  Use the eraser tool to erase any overhang of the paper showing outside of the frame.

Open the poser in another canvas.  Use the marquee tool and draw a rectangle around the top half of the poser.  Copy (Ctrl + C) the poser and switch back to the working canvas.  Paste (Ctrl + V) the poser onto the canvas.   Position the poser in the frame to your liking. If there is overhang of the poser off the paper you can right click on the poser layer and select “Create clipping mask” this will hide any of the poser outside of the shape of the paper.

Add Element 22 to the canvas.  Resize to fit the width of the frame.  Position at the bottom of the canvas so it overlaps the frame.  Add DS.

Add the full poser to the canvas.  Resize to fit and position to the left of the canvas.  Add DS. 

Voila!  The focal point of your tag is now created.

Now decorate your tag with any of the groovy elements from the kit.  Resize the elements as you add them so fit the proportions of your tag.  Experiment with rotating them and mirroring them for more variety.  In addition duplicate elements and use multiple times to fill in holes and add more pizzazz.  In this tutorial to indicate when I used more than one of the same element I will add (X#) by the name to indicate how many versions of the element I used. 

Here are all the additional elements I used from the bottom layers up.
  • Element 24
  • Element 15
  • Element 35 (x3)
  • Element 29 (x2)
  • Element 13
  • Element 2
  • Element 25
  • Element 20
  • Element 30

Add your license and copyright info to the tag.

Add name and any other text of choice.

Save as PNG and go share with all your friends!

Thank you for trying my tut! I’d love to see how your tags turn out so if you like what you made, please post a copy here or show me on Facebook!

New Tags

These lovely tags were made by Charmed Designs using Toon Amy 1



Thursday, 16 October 2014

CT Tutorial featuring Nightborne and snaggable FB Cover


**This tutorial was written using Photoshop CC. I believe the instructions should work with various other versions, but they are not tested on any other version.  This tutorial is my own creation.  Any similarity to any other tutorial is not done purposely or knowingly (aside from the fact that the process is pretty similar in most tutorials).  If you do not know how to do some of the things I mention here (like mirroring an image, adding a drop shadow, resizing elements, etc.), check out my “Tips and Tricks” tutorial. **

Supplies:
PTU Poser – “Nightborne” by English Rose Designs.  You can purchase this Halloween cutie at her store, English Rose Designs.

PTU Kit - “The Soul Keeper” by MarieL-Designs.  Available at Scrappin Dollars ,  and Scraps & Co.
 

FTU Mask - "Mask 06 – Fireball” by Aeval Amore.  Available on my blog, Aeval’s Art.

Abbreviations:
DS – Drop Shadow

Settings I use:
DS Settings - Blend Mode set to Multiply, Opacity set to 75%, Angle set to 120 degrees, Distance 5, Spread 0, Size 5

Ready…..Set….Tag!
Open Paper 6 in a new canvas.  Double click on the layer to unlock it.

Add the Mask to the canvas and resize if needed so it is the same size as the paper.  Then drag the mask layer below the paper layer.

With the mask layer selected, select all (Ctrl + A) and copy the entire canvas (Ctrl + C).  You will see dashed lines surround the canvas. 

Click on the paper layer to activate it, then turn on quick mask (Press the Q key on your keyboard).  The dashed lines will disappear and that is ok.  Next Paste onto the paper (Ctrl + V) and turn your Quick Mask off (Q again). 

You will now see a dotted outline of the mask on your paper.  Press the button on the bottom of layers side bar that is a rectangle with a circle cut out of it.  The mask will now show. 

Right click on the paper layer and select Convert to Smart Image.  This releases just the mask.  The background layer of the mask will become invisible on its own.

Open a new canvas (Ctrl +N) 700 x 700, transparent background.  This will be referred to as the working canvas in my directions when switching between canvases.

Add the paper/mask combination from above to the working canvas.  Resize so that the width is a little more than half the width of the canvas.   Position on the right hand side at the top.  Right click on the layer and select “Duplicate Layer” and click OK.  Move the duplicated layer to the left side of the canvas.  The two masks should overlap.

Add Element 68 to the canvas.  Resize to fit the width of the canvas and position at the top of the tag.  Duplicate this layer as well.  Using the Menu Bar select Edit > Transform > Flip Horizontal to flip the element horizontally.  This will create a bit more coverage at the bottom of the tag.

Add Element 20 to the canvas.  Resize to your liking and position on the left hand side above the road.  The element should fill the area from the road to the top of the canvas on the left side.  Add DS.

Add Element 55 to the canvas.  Resize to fit the width of the canvas.  Position in front of the previous element so the moon shows above the scary house.  Add DS.

Add Element 62 to the canvas.  Resize to fit the width of the canvas.  Position in the center of the canvas.  Change the Opacity of the layer to 81%.  Duplicate the layer and move the duplicated layer above the original one to fill in the gap at the top.  The two layers will overlap.

Add Element 58 to the canvas.  Resize to fit the width of the canvas.  Position on the road in front of everything else.  Leave about ¼ of the canvas showing at the bottom as a floor.  Add DS.

Add the full poser to the canvas.  Resize to fit the canvas and position on the left side of the canvas.  Add DS. 

Voila!  The focal point of your tag is now created.

Now decorate your tag with any of the dark elements from the kit.  Resize the elements as you add them to fit the proportions of your tag.  Experiment with rotating them and mirroring them for more variety.  In addition duplicate elements and use multiple times to fill in holes and add more pizzazz.  In this tutorial to indicate when I used more than one of the same element I will add (X#) by the name to indicate how many versions of the element I used. 

Here are all the additional elements I used from the bottom layers up.

  • Element 66
  • Element 67
  • Element 74
  • Element 99
  • Element 21
  • Element 32
  • Element 1
  • Element 3
  • Element 13
  • Element 16
Add your license and copyright info to the tag.

Add name and any other text of choice.

Save as PNG and go share with all your friends!

Thank you for trying my tut! I’d love to see how your tags turn out so if you like what you made, please post a copy here or show me on Facebook!


Tuesday, 7 October 2014

CT Tutorial for Monsterina 1


**This tutorial was written using Photoshop CC. I believe the instructions should work with various other versions, but they are not tested on any other version.  This tutorial is my own creation.  Any similarity to any other tutorial is not done purposely or knowingly (aside from the fact that the process is pretty similar in most tutorials).  If you do not know how to do some of the things I mention here (like mirroring an image, adding a drop shadow, resizing elements, etc.), check out my “Tips and Tricks” tutorial. **

Supplies:
PTU Poser – “Monsterina 1” by English Rose Designs.  You can purchase this Halloween cutie at her store, English Rose Designs.

PTU Kit - “Halloween Dolls” by Ginnibug Designz.  Available for purchase at PicsForDesign.

FTU Mask - "Mask 11 - Blurry” by Aeval Amore.  You can download the mask on my blog, Aeval’s Art.

Abbreviations:
DS – Drop Shadow

Settings I use:
DS Settings - Blend Mode set to Multiply, Opacity set to 75%, Angle set to 120 degrees, Distance 5, Spread 0, Size 5

Ready…..Set….Tag!
Open Paper hdp3 in a new canvas.  Double click on the layer to unlock it.

Add the Mask to the canvas and resize if needed so it is the same size as the paper.  Then drag the mask layer below the paper layer.

With the mask layer selected, select all (Ctrl + A) and copy the entire canvas (Ctrl + C).  You will see dashed lines surround the canvas. 

Click on the paper layer to activate it, then turn on quick mask (Press the Q key on your keyboard).  The dashed lines will disappear and that is ok.  Next Paste onto the paper (Ctrl + V) and turn your Quick Mask off (Q again). 

You will now see a dotted outline of the mask on your paper.  Press the button on the bottom of layers side bar that is a rectangle with a circle cut out of it.  The mask will now show. 

Right click on the paper layer and select Convert to Smart Image.  This releases just the mask.  The background layer of the mask will become invisible on its own.

Open a new canvas (Ctrl +N) 700 x 700, transparent background.  This will be referred to as the working canvas in my directions when switching between canvases.

Add the paper/mask combination from above to the working canvas.  Resize to fit the canvas.  Right click on the layer and select “Blending options” turn on DS and IS (Inner Shadow).

Add Element hd64 to the canvas.  Resize to fit most the width of the canvas and position at the bottom.  Add DS.

Add Element hdm to the canvas.  Resize to fit the width of the tag.  Position so it slightly overlaps the road.  Add DS.

Add Element hd10 to the canvas.  Resize to your liking and position in the center of backdrop.  Add DS.

Add Element hd36 to the canvas.  Resize to fit the width of the canvas.  Position the fence so it meets up with the road and is in front of the scarecrow.  Add DS.

Add Element hd50 to the canvas.  Resize to about half the width of the canvas.  Position at the top in the upper right corner.  Add DS.  Right click on the layer and select “Duplicate layer”.  Move the duplicated layer to line up with the end of the first so it reaches from the end of the original element to the upper left corner.

Add Element hd55 to the canvas.  Resize to your liking and position in front of the fence on the left side of the canvas.  Add DS.

Add Element hd18 to the canvas.  Resize to your liking and position in the upper left corner.  Add DS.

Add Paper hdp1 to the canvas.  Resize to fit over the opening in the frame.  Move the paper layer below the frame.  Use the eraser tool to erase any overhang of the paper showing outside of the frame.

Open the poser in another canvas. Use the marquee tool and draw a rectangle around the top half of the poser.  Copy (Ctrl + C) the poser and switch back to the working canvas.  Select the frame layer and paste (Ctrl + V) the poser onto the canvas.  Resize the poser to display to your liking and position in the center of the Frame.  Erase any part you don’t want to show using the eraser tool.  Add DS.

Add the poser to the canvas as the top layer.  Resize to fit on the canvas and position to the right of the canvas to look as though she is standing on the road.  Add DS.

Voila!  The focal point of your tag is now created.

Now decorate your tag with any of the fun Halloween elements from the kit.  Resize the elements as you add them to fit the proportions of your tag.  Experiment with rotating them and mirroring them for more variety.  In addition duplicate elements and use multiple times to fill in holes and add more pizzazz.  In this tutorial to indicate when I used more than one of the same element I will add (X#) by the name to indicate how many versions of the element I used. 

Here are all the additional elements I used from the bottom layers up.

  • Element hd5 (x2)
  • Element hd4 (x2)
  • Element hd1
Add your license and copyright info to the tag.

Add name and any other text of choice.

Save as PNG and go share with all your friends!

Thank you for trying my tut! I’d love to see how your tags turn out so if you like what you made, please post a copy here or show me on Facebook!

New in Store







Available at:

Halloween Tags

Tags made by Laguerita Designz using Rosemary 1


Tags made by Dizzyz Designs Using Witch 1


 Tags made by Magical Creations using Nightborne 1