Monday, 28 July 2014

New in Store






Available at:

CT Tutorial featuring Summer6 from the Summer Collection

**This tutorial was written using Photoshop CC. I believe the instructions should work with various other versions, but they are not tested on any other version.  This tutorial is my own creation.  Any similarity to any other tutorial is not done purposely or knowingly (aside from the fact that the process is pretty similar in most tutorials).  If you do not know how to do some of the things I mention here (like mirroring an image, adding a drop shadow, resizing elements, etc.), check out my “Tips and Tricks” tutorial. **

Supplies:
PTU Poser – “Summer6” by English Rose Designs.  You can purchase this elegant beauty at her store, English Rose Designs.

FTU Kit- “Summer at the Shore” by Digicats (and Dogs).  You can download this kit on the Digicats (and Dogs) blog.

Abbreviations:
DS – Drop Shadow

Settings I use:
DS Settings - Blend Mode set to Multiply, Opacity set to 75%, Angle set to 120 degrees, Distance 5, Spread 0, Size 5

Ready…..Set….Tag!

Create your background mask:
Open a new canvas (Ctrl +N) 700 x 700, transparent background.  This will be referred to as the working canvas in my directions when switching between canvases.

Add Paper 12 to the canvas and resize to fit the canvas.

Add the Sand Dune element to the canvas.  Resize to fit the width of the canvas and position at the bottom of the canvas.

Add the Sea element to the canvas. Resize to fit the width of the canvas and position above the sand dune slightly overlapping.

Open the poser in another canvas.  Use the marquee tool and draw a rectangle around the upper portion of the poser.  Copy (Ctrl + C) the poser upper half and switch back to the working canvas.  Paste (Ctrl + V) the poser onto the canvas.  Resize to fit in the right side of the sky area.  Right click on the poser layer and select Blending Options.  Change the Blend Mode to the Hard Light.

Add the Volleyball Set to the canvas.  Resize to fit the width.  Position the set on the beach.  Add DS.

Add the reclining poser to the canvas.  Resize to fit the width.  Position in front of the net and add DS.

Add the reclined poser to the canvas and resize to fit the canvas.  Position at the bottom as the top layer.  Add DS.

Voila!  The focal point of your tag is now created.

Now decorate your tag with any of the beach themed elements from the kit.  Resize the elements as you add them to fit the proportions of your tag.  Experiment with rotating them and mirroring them for more variety.  In addition duplicate elements and use multiple times to fill in holes and add more pizzazz.  In this tutorial to indicate when I used more than one of the same element I will add (X#) by the name to indicate how many versions of the element I used. 

Here are all the additional elements I used from the bottom layers.
  • Sunshower
  • Sparkles
  • Sun
  • Lighthouse
  • Kite
  • Seashell02
  • Seashell01
  • Seashell03
  • Starfish
  • Beach Umbrella
  • Clam Shell
  • Flower02
  • Flower01
  • Conch Shell
  • Flower05
  • Flower04
  • Sunglasses
  • Summer Drink

Add your license and copyright info to the tag.

Add name and any other text of choice.

Save as PNG and go share with all your friends!


Thank you for trying my tut! I’d love to see how your tags turn out so if you like what you made, please post a copy here or show me on Facebook!

Sunday, 27 July 2014

CT Tutorial featuring Summer1 from the Summer Collection

**This tutorial was written using Photoshop CC. I believe the instructions should work with various other versions, but they are not tested on any other version.  This tutorial is my own creation.  Any similarity to any other tutorial is not done purposely or knowingly (aside from the fact that the process is pretty similar in most tutorials).  If you do not know how to do some of the things I mention here (like mirroring an image, adding a drop shadow, resizing elements, etc.), check out my “Tips and Tricks” tutorial. **

Supplies:
PTU Poser – “Summer1” by English Rose Designs.  You can purchase this elegant beauty at her store, English Rose Designs.

PTU Kit- “Summer Bright” by Drama Bomb Designs.  You can purchase this kit at Spazzd Art.

FTU Mask – “Mask 03 - Jagged” by Aeval Amore.  You can download the mask on my blog, Aeval’s Art.

Abbreviations:
DS – Drop Shadow

Settings I use:
DS Settings - Blend Mode set to Multiply, Opacity set to 75%, Angle set to 120 degrees, Distance 5, Spread 0, Size 5

Ready…..Set….Tag!

Create your background mask:
Open Paper 12 in PS.  Double click on the layer to unlock it.

Add the Mask to the canvas and resize if needed so it is the same size as the paper.  Then drag the mask layer below the paper layer.

With the mask layer selected, select all (Ctrl + A) and copy the entire canvas (Ctrl + C).  You will see dashed lines surround the canvas. 

Click on the paper layer to activate it, then turn on quick mask (Press the Q key on your keyboard).  The dashed lines will disappear and that is ok.  Next Paste onto the paper (Ctrl + V) and turn your Quick Mask off (Q again). 

You will now see a dotted outline of the mask on your paper.  Press the button on the bottom of layers side bar that is a rectangle with a circle cut out of it.  The mask will now show. 

Right click on the paper layer and select Convert to Smart Image.  This releases just the mask.  The background layer of the mask will become invisible on its own. 

Open a new canvas (Ctrl +N) 700 x 700, transparent background.  This will be referred to as the working canvas in my directions when switching between canvases.

Add the mask you made above to the canvas and resize to fit the canvas.

Add Element 65 and resize to fit on the canvas.  Position so it appears that the tree is on the beach on the left side.  Add DS.  Duplicate the layer and move the duplicate layer over to the right side of the beach.

Add Element  85 to the canvas and resize to fit the width of the canvas.  Position so it is centered in front of the trees.

Open the poser in another canvas.  Use the marquee tool and draw a rectangle around the head of the poser.  Copy (Ctrl + C) the poser head and switch back to the working canvas.  Paste (Ctrl + V) the poser head onto the canvas.  Resize to fit in the left area of the heart.  Use the same method to copy another view of the poser’s head and paste it to fit in the right side of the heart.

Add the reclined poser to the canvas and resize to fit the canvas.  Position at the bottom as the top layer.  Add DS.

Voila!  The focal point of your tag is now created.

Now decorate your tag with any of the beach themed elements from the kit.  Resize the elements as you add them to fit the proportions of your tag.  Experiment with rotating them and mirroring them for more variety.  In addition duplicate elements and use multiple times to fill in holes and add more pizzazz.  In this tutorial to indicate when I used more than one of the same element I will add (X#) by the name to indicate how many versions of the element I used. 

Here are all the additional elements I used from the bottom layers.
  • Element 79
  • Element 81
  • Element 67
  • Element 56
  • Element 61
  • Element 73
  • Element 82 (x3)
  • Element 105
  • Element 78
  • Element 77
  • Element 76
  • Element 75
  • Element 86
  • Element 100
  • Element 94
  • Element 92
  • Element 90
  • Element 87

Add your license and copyright info to the tag.

Add name and any other text of choice.

Save as PNG and go share with all your friends!



Thank you for trying my tut! I’d love to see how your tags turn out so if you like what you made, please post a copy here or show me on Facebook!

CT Tutorial featuring Summer9 from the Summer Collection

**This tutorial was written using Photoshop CC. I believe the instructions should work with various other versions, but they are not tested on any other version.  This tutorial is my own creation.  Any similarity to any other tutorial is not done purposely or knowingly (aside from the fact that the process is pretty similar in most tutorials).  If you do not know how to do some of the things I mention here (like mirroring an image, adding a drop shadow, resizing elements, etc.), check out my “Tips and Tricks” tutorial. **

Supplies:
PTU Poser – “Summer9” by English Rose Designs.  You can purchase this elegant beauty at her store, English Rose Designs.

FTU Kit- “Hibiscus” by Gimptastic Scraps.  You can download this kit at Amy & Leah's Gimptastic Tuts blog.

FTU Mask – “Mask 08 - Focus” by Aeval Amore.  You can download the mask on my blog, Aeval’s Art.

Abbreviations:
DS – Drop Shadow

Settings I use:
DS Settings - Blend Mode set to Multiply, Opacity set to 75%, Angle set to 120 degrees, Distance 5, Spread 0, Size 5

Ready…..Set….Tag!

Create your background mask:
Open Paper 6 in PS.  Double click on the layer to unlock it.

Add the Mask to the canvas and resize if needed so it is the same size as the paper.  Then drag the mask layer below the paper layer.

With the mask layer selected, select all (Ctrl + A) and copy the entire canvas (Ctrl + C).  You will see dashed lines surround the canvas. 

Click on the paper layer to activate it, then turn on quick mask (Press the Q key on your keyboard).  The dashed lines will disappear and that is ok.  Next Paste onto the paper (Ctrl + V) and turn your Quick Mask off (Q again). 

You will now see a dotted outline of the mask on your paper.  Press the button on the bottom of layers side bar that is a rectangle with a circle cut out of it.  The mask will now show. 

Right click on the paper layer and select Convert to Smart Image.  This releases just the mask.  The background layer of the mask will become invisible on its own. 

Open a new canvas (Ctrl +N) 700 x 700, transparent background.  This will be referred to as the working canvas in my directions when switching between canvases.

Add the mask you made above to the canvas and resize to fit the canvas.

Add the Sand element to the canvas.  Resize to fit the width of the canvas.  Position at the bottom of the canvas overlapping the mask.

Add PalmTree element to the canvas.  Resize to your liking.  Move the element layer below the sand layer.  Add DS.  Position on the left side of the canvas.  Duplicate the tree and move the duplicate to the right side of the canvas.

Add the Wave element to the canvas.  Move element below the tree layers, resize and rotate the element so that the crest of the wave shows above the sand. Position on the left side of the canvas. Duplicate the element and use the eraser tool to erase the bottom half of the wave.  Move the remaining portion of the duplicate to the right side of the canvas so slightly less of the wave shows above the sand.

Open the poser in another canvas.  Use the marquee tool and draw a rectangle around the head of the poser.  Copy (Ctrl + C) the poser head and switch back to the working canvas.  Paste (Ctrl + V) the poser head onto the paper.  Resize to fit in the open area between the trees.  If necessary use the Eraser tool to erase any part of the surfboard area that you may have copied with the head.  Right click on the head layer and select Blending Options, change the Blend Mode to Pin Light.

Add the Branch Element the canvas and resize so it fits between the trees.  Make sure this is above the Sand element.  Add DS.

Add the full poser to the canvas and resize to fit the canvas.  Position on the left side in front of the tree.  Add DS.

Voila!  The focal point of your tag is now created.

Now decorate your tag with any of the beach themed elements from the kit.  Resize the elements as you add them to fit the proportions of your tag.  Experiment with rotating them and mirroring them for more variety.  In addition duplicate elements and use multiple times to fill in holes and add more pizzazz.  In this tutorial to indicate when I used more than one of the same element I will add (X#) by the name to indicate how many versions of the element I used. 

Here are all the additional elements I used from the bottom layers.
  • Coconut
  • Drum
  • LemonSlice
  • Parrot
  • Flower1
  • Flower2
  • Flower4
  • Flower5
  • Pineapple
  • Shell2
  • Flower8
  • Butterfly
  • Bananas
  • Turtle
  • TropicalFruit

 Add your license and copyright info to the tag.

Add name and any other text of choice.

Save as PNG and go share with all your friends!

Thank you for trying my tut! I’d love to see how your tags turn out so if you like what you made, please post a copy here or show me on Facebook!



Saturday, 19 July 2014

CT Tutorial featuring Summer 5 from the Summer Collection

**This tutorial was written using Photoshop CC. I believe the instructions should work with various other versions, but they are not tested on any other version.  This tutorial is my own creation.  Any similarity to any other tutorial is not done purposely or knowingly (aside from the fact that the process is pretty similar in most tutorials).  If you do not know how to do some of the things I mention here (like mirroring an image, adding a drop shadow, resizing elements, etc.), check out my “Tips and Tricks” tutorial. **

Supplies:
PTU Poser – “Summer 5” by English Rose Designs.  You can purchase this elegant beauty at her store, English Rose Designs.

PTU Kit- “Boho Chic” by MellieBeans.  You can purchase this kit at PicsForDesign.

FTU Mask – “Mask 05 - Dreamscape” by Aeval Amore.  You can download the mask on my blog, Aeval’s Art.

 

Abbreviations:
DS – Drop Shadow

Settings I use:
DS Settings - Blend Mode set to Multiply, Opacity set to 75%, Angle set to 120 degrees, Distance 5, Spread 0, Size 5

Ready…..Set….Tag!

Create your background mask:
Open paper 15 in a new canvas.  Double click on the layer to unlock it.

Add the Mask to the canvas and resize if needed so it is the same size as the paper.  Then drag the mask layer below the paper layer.

With the mask layer selected, select all (Ctrl + A) and copy the entire canvas (Ctrl + C).  You will see dashed lines surround the canvas. 

Click on the paper layer to activate it, then turn on quick mask (Press the Q key on your keyboard).  The dashed lines will disappear and that is ok.  Next Paste onto the paper (Ctrl + V) and turn your Quick Mask off (Q again). 

You will now see a dotted outline of the mask on your paper.  Press the button on the bottom of layers side bar that is a rectangle with a circle cut out of it.  The mask will now show. 

Right click on the paper layer and select Convert to Smart Image.  This releases just the mask.

Open a new canvas (Ctrl +N) 700 x 700, transparent background.  This will be referred to as the working canvas in my directions when switching between canvases.

Add the paper/mask combination from above to the working canvas.  Resize to fit the canvas.

Add Frame 03 to the canvas and resize to fit the width of the canvas. Add DS.

Add Paper 14 to the canvas and move the layer below the frame.  Resize the paper to fill the center open portion of the canvas.

Add Element 07 to the canvas.  Resize to fit on the paper in the frame and position it on the left side of the paper showing through the frame.  Duplicate the layer and drag the duplicate layer to the right side of the paper showing through the frame.

Add the sitting pose of your poser to the canvas.  Resize to fit to your liking in the frame.  Position on the right side of the frame. Add DS.

Add the full body pose of your poser now and resize to fit the height of the canvas.  Position her on the left of the canvas and add DS.

Voila!  The focal point of your tag is now created.

Now decorate your tag with any of the beautiful elements from the kit.  Resize the elements as you add them to fit the proportions of your tag.  Experiment with rotating them and mirroring them for more variety.  In addition duplicate elements and use multiple times to fill in holes and add more pizzazz.  In this tutorial to indicate when I used more than one of the same element I will add (X#) by the name to indicate how many versions of the element I used. 

Here are all the additional elements I used from the bottom layers up.
  • Element 14 (x2)
  • Element 09 (x2)
  • Element 28 (x2)
  • Element 12
  • Element 01
  • Element 17
  • Element 22
  • Element 15
  • Element 08
  • Element 13
  • Element 16
  • Element 34
  • Element 21
  • Element 06
  • Element 04
  • Element 05
  • Element 03
Add your license and copyright info to the tag.

Add name and any other text of choice.

Save as PNG and go share with all your friends!

Thank you for trying my tut! I’d love to see how your tags turn out so if you like what you made, please post a copy here or show me on Facebook!

Sunday, 13 July 2014

CT Tutorial for Alisha


**This tutorial was written using Photoshop CC. I believe the instructions should work with various other versions, but they are not tested on any other version.  This tutorial is my own creation.  Any similarity to any other tutorial is not done purposely or knowingly (aside from the fact that the process is pretty similar in most tutorials).  If you do not know how to do some of the things I mention here (like mirroring an image, adding a drop shadow, resizing elements, etc.), check out my “Tips and Tricks” tutorial. **

Supplies:
PTU Poser – “Alisha” by English Rose Designs.  You can purchase this elegant beauty at her store, English Rose Designs.

PTU Kit- “December” by Bookworm Dezines.  You can purchase this kit at PicsForDesign.

FTU Template – “Template 213” by Toxic Desirez.  You can download the template from the Toxic Desirez blog (use the link in the post to get templates # 213-236).

FTU Mask – “Mask 11 - Blurry” by Aeval Amore.  You can download the mask on my blog, Aeval’s Art.

Abbreviations:
DS – Drop Shadow

Settings I use:
DS Settings - Blend Mode set to Multiply, Opacity set to 75%, Angle set to 120 degrees, Distance 5, Spread 0, Size 5

Ready…..Set….Tag!

Create your background mask:
Open paper 12 in a new canvas.  Double click on the layer to unlock it.

Add the Mask to the canvas and resize if needed so it is the same size as the paper.  Then drag the mask layer below the paper layer.

With the mask layer selected, select all (Ctrl + A) and copy the entire canvas (Ctrl + C).  You will see dashed lines surround the canvas. 

Click on the paper layer to activate it, then turn on quick mask (Press the Q key on your keyboard).  The dashed lines will disappear and that is ok.  Next Paste onto the paper (Ctrl + V) and turn your Quick Mask off (Q again). 

You will now see a dotted outline of the mask on your paper.  Press the button on the bottom of layers side bar that is a rectangle with a circle cut out of it.  The mask will now show. 

Right click on the paper layer and select Convert to Smart Image.  This releases just the mask.

Open a new canvas (Ctrl +N) 700 x 700, transparent background.  This will be referred to as the working canvas in my directions when switching between canvases.

Add the paper/mask combination from above to the working canvas.  Resize to fit the canvas.

Decorate your template pieces:
Open up the PSD file for the template. 

When working with a template, the first thing I do is figure out if I am going to cover the layers with papers or styles and then apply all of them from the bottom up.  For this template I used a clipping mask to apply papers.  (If you do not know how to use the clipping mask feature in Photoshop, you can check out my tutorial here on how to use them:  http://aevalsart.blogspot.com/2014/02/how-to-make-clipping-mask.html).

The layers below I used a clipping mask with the specified papers (from bottom layer up):
  • Copy (2) of Raster 9 – Paper 12
  • Copy of Raster 9 – Paper 12
  • Raster 8 – Paper 2
  • Copy of Raster 8 – Paper 2
  • Raster 5 – Paper 8

I applied complimenting styles to the following layers:
  • Raster 7
  • Copy of Raster 7
  • Raster 6
  • Copy of Raster 6
  • Copy of Raster 2
  • Raster 2

I deleted these layers of the template:
  • Raster 1
  • Raster 6
  • Copy of Raster 6

 After applying the papers and styles, use Alt+Ctrl+A and select all layers.  Copy and paste them onto your mask layer on your working canvas.  With all template layers selected, resize to fit the canvas.

Add your poser/tubes to canvas:
Add your poser to the canvas.  Resize her so she fits in the canvas on the right side on top of all the template layers. Add DS.

Open the psd file of your poser you want to use for the close-up, use the Rectangular Marquee Tool to draw a box around the top half of the poser.  Copy (Ctrl + C) the selection and return to your working canvas.

On your working canvas make sure the Raster 2 layer is selected then paste (Ctrl + V) the copied selection.  Resize the selection so that poser’s head fits to your satisfaction in the middle of the circle.  Reposition the head until you like how it appears.  Use the eraser tool to erase any of the poser layer showing outside of the area you want it to display in.

Voila!  The focal point of your tag is now created.

Now decorate your tag with any of the beautiful elements from the kit.  Resize the elements as you add them so fit the proportions of your tag.  Experiment with rotating them and mirroring them for more variety.  In addition duplicate elements and use multiple times to fill in holes and add more pizzazz.  In this tutorial to indicate when I used more than one of the same element I will add (X#) by the name to indicate how many versions of the element I used. 

Here are all the additional elements I used from the bottom layers up (although they are sometimes in between layers of the template for better impact).
  • Element 2
  • Element 24 (x2)
  • Element 41 (x2)
  • Element 42 (x3)
  • Element 3 (x2)
  • Element 28
  • Element 34
  • Element 32 (x2)

 Add your license and copyright info to the tag.

Add name and any other text of choice.

Save as PNG and go share with all your friends!


Thank you for trying my tut! I’d love to see how your tags turn out so if you like what you made, please post a copy here or show me on Facebook!

FTU FB Cover featuring Anna


New FTU FB Cover!  I made this to match the tag created using the tutorial for the tag below featuring Anna by English Rose Designs:
You can find a copy of the tutorial with all supplies and links needed here.
If you want to make your own tag design, you can purchase Anna from the English Rose Designs website here.

Sunday, 6 July 2014

CT Tutorial featuring Rose3


**This tutorial was written using Photoshop CC. I believe the instructions should work with various other versions, but they are not tested on any other version.  This tutorial is my own creation.  Any similarity to any other tutorial is not done purposely or knowingly (aside from the fact that the process is pretty similar in most tutorials).  If you do not know how to do some of the things I mention here (like mirroring an image, adding a drop shadow, resizing elements, etc.), check out my “Tips and Tricks” tutorial. **

Supplies:
PTU Poser – “Rose3” by English Rose Designs.  You can purchase this elegant beauty at her store, English Rose Designs.

PTU Kit- “Gothique Touch” by Whispy's D'zines.  You can purchase this kit at Whisprd DesignzTreasured ScrapsMystical Scraps, and D’zines From The Heart.

  

FTU Template – “TEMP-6” by Addictive Pleasures.  You can download the template from the Addictive Pleasures Templates blog (download TEMPS 6-10 link and it is in the bundle).

FTU Mask – “Mask 14 - Circles” by Aeval Amore.  You can download the mask on my blog, Aeval’s Art.

Abbreviations:
DS – Drop Shadow

Settings I use:
DS Settings - Blend Mode set to Multiply, Opacity set to 75%, Angle set to 120 degrees, Distance 5, Spread 0, Size 5

Ready…..Set….Tag!

Create your background mask:
Open paper 12 in a new canvas.  Double click on the layer to unlock it.

Add the Mask to the canvas and resize if needed so it is the same size as the paper.  Then drag the mask layer below the paper layer.

With the mask layer selected, select all (Ctrl + A) and copy the entire canvas (Ctrl + C).  You will see dashed lines surround the canvas. 

Click on the paper layer to activate it, then turn on quick mask (Press the Q key on your keyboard).  The dashed lines will disappear and that is ok.  Next Paste onto the paper (Ctrl + V) and turn your Quick Mask off (Q again). 

You will now see a dotted outline of the mask on your paper.  Press the button on the bottom of layers side bar that is a rectangle with a circle cut out of it.  The mask will now show. 

Right click on the paper layer and select Convert to Smart Image.  This releases just the mask.

Open a new canvas (Ctrl +N) 700 x 700, transparent background.  This will be referred to as the working canvas in my directions when switching between canvases.

Add the paper/mask combination from above to the working canvas.  Resize to fit the canvas.

Decorate your template pieces:
Open up the PSD file for the template. 

When working with a template, the first thing I do is figure out if I am going to cover the layers with papers or styles and then apply all of them from the bottom up.  For this template I used a clipping mask to apply papers.  (If you do not know how to use the clipping mask feature in Photoshop, you can check out my tutorial here on how to use them:  http://aevalsart.blogspot.com/2014/02/how-to-make-clipping-mask.html).

The layers below I used a clipping mask with the specified papers (from bottom layer up): 
  • Rectangle – Paper 1
  • Copy of square background – Paper 3
  • Square frame – Paper 6
  • Strip – Paper 12
  • Square background – Paper 4
  • Square frame 2 – Paper 7
  • Circle – Paper 5
  • Strip 2 – Paper 15
  • Circle frame – Paper 11
  • Rectangle 2 – Paper 8
  • Rectangle 3 – Paper 10

I applied complimenting styles to the following layers:
  • Raster 1
  • Raster 2
  • THE LOOK
  • Shes got

I deleted these layers of the template:
  • Raster 10
  • Square background
  • Copyright layer

After applying the papers and styles, use Alt+Ctrl+A and select all layers.  Copy and paste them onto your mask layer on your working canvas.  With all template layers selected, resize to fit the canvas.

Add your poser/tubes to canvas:
Add your poser to the canvas.  Resize her so she fits in the canvas on the left side on top of all the template layers. Add DS.

Open the psd file of your poser you want to use for the close-up, use the Rectangular Marquee Tool to draw a box around the top half of the poser.  Copy (Ctrl + C) the selection and return to your working canvas.

On your working canvas make sure the Paper 15 layer is selected then paste (Ctrl + V) the copied selection.  Resize the selection so that poser’s head fits to your satisfaction in the middle of the circle.  Reposition the head until you like how it appears.  Add DS.  Use the eraser tool to erase any of the poser layer showing outside of the area you want it to display in.

Open the psd file of your poser you want to use for the smaller head shot in the upper right corner, use the Rectangular Marquee Tool to draw a box around the top half of the poser.  Copy (Ctrl + C) the selection and return to your working canvas.

On your working canvas make sure the Paper 4 layer is selected then paste (Ctrl + V) the copied selection.  Resize the selection so that poser’s head fits to your satisfaction in the middle of the circle.  Reposition the head until you like how it appears.  You may need to rotate the head using the Free Rotate tool (Ctrl + T). Use the eraser tool to erase any of the poser layer showing outside of the area you want it to display in.

Voila!  The focal point of your tag is now created.

Decorate the tag:
Now decorate your tag with any of the beautiful elements from the kit.  Resize the elements as you add them so fit the proportions of your tag.  Experiment with rotating them and mirroring them for more variety.  In addition duplicate elements and use multiple times to fill in holes and add more pizzazz.  In this tutorial to indicate when I used more than one of the same element I will add (X#) by the name to indicate how many versions of the element I used. 

Here are all the additional elements I used from the bottom layers up (although they are sometimes in between layers of the template for better impact).
  • Element 21
  • Element 15 (x4)
  • Element 43
  • Element 37 (x2)
  • Element 44 (x2)
  • Element 30
  • Element 29 (x2)
  • Element 34
  • Element 33
  • Element 5 (x2)
  • Element 20
  • Element 35

Add your license and copyright info to the tag.

Add name and any other text of choice.

Save as PNG and go share with all your friends!


Thank you for trying my tut! I’d love to see how your tags turn out so if you like what you made, please post a copy here or show me on Facebook!